Recon Projector Headlight 264194BK & CL (Toyota Tund Bedienungsanleitung PDF herunterladen

RECON

Part # 264194BK & CL - Toyota Tundra 2007 thru 2011

Projector Headlight Installation Instructions

Safety first: always work on a flat, dry, well lit surface with parking brake securely set and wheels chocked.

Open hood and disconnect negative battery cable.

2.) Side view of how trim piece

on driver side is removed.

Remove trim piece below

headlight by firmly pulling it

straight out toward the front of

the vehicle. It is held in by two

pressure fittings that require a

good amount of pull for them to

pop out.

1.) Remove both black plastic

rivets by prying up center

portion with a flat head

screwdriver.

3.) Remove three bolts with a

10mm socket. Remove

headlight housing. Carefully

disconnect all harnesses from

stock housing. Remove the two

amber bulbs from stock

housing and install them into

new housing.

To connect the halos, LED’s, and top “brow” light you will need to tap into the stock grey

harness that holds the large amber bulb.

Driver side:

Tap the solid white wire to the stock red wire (amber “brow” light to blinker).

Tap the both the dotted and stripped white wire to the stock purple wire (Halo & top row of led’s to running lights).

All Three black wires will tap into the middle wire in the stock harness which is white with a black stripe.

Passenger side:

Tap the solid white wire to the stock pink wire (amber “brow” light to blinker).

Tap both the dotted and stripped white wire to the stock purple wire (Halo & top row of led’s to running lights).

All Three black wires will tap into the middle wire in the stock harness which is white with a black stripe.

Reverse steps for reassembly.

This wiring is from an 07 Tundra that was equipped with from the factory with day time running lights. If your

vehicle is not equipped with day time running lights then you will need to have the running lights on for the halo and

led’s to be on.

Before driving the vehicle make sure all lights are operating properly. Adjust the aim of the lights by turning the ad-

justing screws on the back of the housings. Each light high and low beam adjust independently.

If you have any questions, feel free to contact us:

info@reconaccessories.com - www.GoRECON.com

Driver side: 1
Passenger side: 1

Inhaltsverzeichnis

Seite 1 - Passenger side:

RECON Part # 264194BK & CL - Toyota Tundra 2007 thru 2011 Projector Headlight Installation Instructions Safety first: always work on a flat, dry,

Kommentare zu diesen Handbüchern

Keine Kommentare

Recon Projector Headlight 264194BK & CL (Toyota Tund Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Recon Projector Headlight 264194BK & CL (Toyota Tund herunter. RECON Projector Headlight 264194BK & CL (Toyota Tundra 2007 thru 2011) User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Recon Projector Headlight 264194BK & CL (Toyota Tund